FAQs + Knowledgebase

Frequently Asked Questions (FAQs)

FAQs about setting up & configuring the range of JAGER PRO cameras.

FAQs covering the range of JAGER PRO M.I.N.E Trapping products.

FAQs covering bait & lure selection.

FAQs covering mobile carriers & SIM cards.

FAQs about setting up & configuring the range of Spartan cameras.

FAQs covering trap site selection.

Click here for detailed guidance on how to set up & configure your cameras and/or trapping gear based on desired use.

FAQs about the wireless portals available direct from manufacturers.

FAQs about setting up & configuring the range of Buckeye Cam devices.

FAQs - M.I.N.E.™ Trapping Products

FAQs covering the range of JAGER PRO M.I.N.E Trapping products.

Verizon Command Codes.

Take Photo and Send Now: *500#
Activate RF Trigger: *777#
Status Report: *501#

3G Command Codes.

Take Photo and Send Now: *500#
Activate RF Trigger: *777#
Test Signal Strength: *150#
Test Battery Level: *201#

2G Command Codes.

Take Photo and Send Now: #500#
Close MINE Gate: #210#
Test Signal Strength: #520#
Test Battery Level: #521#

If it is the same time every day, there may be interference from a similar frequency in the area. Reset the receiver in the control box by holding the button for 6-8 seconds. Re-sync your camera and on site remote. If the problem continues, your receiver may need to be replaced.

If it is for no reason, ensure the locking mechanism fully engages.

Will your on-site remote drop the gate? If yes, re-sync your camera to your control box. See how do I time my camera to my control box.

Check the battery strength inside the control box using a multi-meter. Make sure it is 11.50 volts or higher, if it is lower, recharge the battery. Recheck the connections inside the control box and that none of the connection have loosened or corroded. Check the batteries inside the onsite remote, press and hold the button for 2-3 seconds and watch for the light to come on. If the light doesn’t come on, check the battery or replace it. Re-pair the onsite remote and camera to the control box.